Reverend Musical Instruments, Circa 2001.
Model Name: Slingshot
Serial Number: 01921 (Hand Written and Initialed on Back of Headstock).
Color: Hum Shielding Corrugated Aluminum Metal Finish (Front and Back). White Plastic Outer Body Rim (injection molded high impact polymer).
Bolt-on One Piece Maple Neck and Headstock (Attached with stainless steel bolts and washers). Rosewood Fingerboard, 25.5 inch Scale, Twenty-Two Frets, joined at Sixteenth Fret, White Dot Inlay Position Markers. Width At Nut: 1 and 5/8 inches (42 mm). Traditional One Way Adjustable Truss-Rod. Reverend Eastpointe, MI USA with "R Circle" Logo on front of Headstock. Chrome Plated Low Friction String Trees on Headstock. Neck has Walnut "Skunk" Stripe on back, indicating that it is an Early "Eastpointe Neck" (EPN).
Semi-Hollow Body with Six Inch Wide White Mahogany Center Block. Small Steel Sustain Bar embedded in Center Block. Body is 13 inches Wide, 1 and 1/2 inches Deep with a Single Cutaway.
Top and Back: Phenolic Laminate made from Wood Fibers and Resin. Corrugated Aluminum Metal Finish on Top and Back acts as a Large Hum Shield, reducing single coil pickup hum by about ten percent when compared with standard finishes. Corrugated Aluminum Metal Finish is also groovy (literally).
Plastic Pickguard in Silver Mist with Black Bevelled Edge. Hipshot Bridge With Tremolo has Six Individually Adjustable Chrome Saddles.
Two Reverend White P-90 Pickups (Single Coil). Note: All Reverend Single Coil Pickups are Hum Cancelling when used in combination.
One Tone-Preserving Volume Control Knob (Does not lose treble when turned down), and One Custom Tone Control Knob (only cuts the highest frequencies without severely reducing the overall volume). Three position Pickup Selector Switch with White Plastic Knob.
All Chrome Plated Hardware, including Armrest, Bridge, Saddles, Volume and Tone Control Knobs, Covered Tuners and Machine Heads, String Trees, and Strap Buttons.